Adrenaline Rush Car Club

Xenia Ohio
 
HomeHome  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  

Share | 
 

 New parts

View previous topic View next topic Go down 
AuthorMessage
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: New parts   Thu 08 Apr 2010, 12:47 pm

Ok sence I had 4 cars I had a hard Time keeping up on all of them wile trying to upgrade stuff. So I sold the lancer and the eclipse will be gone in a week I hope leaving me my 2 mr2's.

Untill I get a good bit of things done to both I'm going to continue to work 2 jobs(and doing college) so time is hard to find. Sorry if I miss a lot of stuff during the week days.

Ok sence last season I have done a few things to both cars and about to buy a bunch of stuff for the turbo mr2 now that the lancer is gone.

91 mr2 turbo
- new wires(sti performance) cap, rotor, plugs(one step colder to help prevent detonation)
- high and tight sway bar end links or front and rear(mine were clicking like crazy)
-just ordered full polyurethane bushings kit
-fuel filter
-water temp sensor
-knock sensor
-urithane motor mount inserts
$$stuff I'm ordering soon$$
-fuel pressure regulator
-safc
-ether a ct-20b or a ct-27 turbo(will install my tubular Mani with new turbo)
-Greddy timing belt
-fuel& oil gauges mounted on A pillar
-solid brass shifter cable bushings(tightin up andmake shifting smooth)
-brass shifter base bushings(smoother shifting)

by late June or July I plan on hitting the track after I have installed all this and it's been tuned. I hope to hit mid to high 12's. I have seen mr2's with less mods run 12.9s so I don't think it's a far stretch if I can get a good launch.

85 mr2
-all new gaskits & belts
-rebulit head with full valve job
-new intake set up
-polished aluminum valley cover and bolts
-painted valve cover
-had all the rust in the floor boards cut out and new metal welded in, then undercoated. (it's an 85 so the rust was way worse than I thought but all gone now)

at the moment I don't have a lot of plans for this car cuz my taxes were screwed up and I ended up paying a good bit of money.

But for sure I'm buying
-replacement kyb rear strut inserts(mine are all jacked up)
-install my right rear weel bearing(makes a pretty anoying clicking)


I got a good bit of stuff to do still but I should be able to get it all done by end of summer.

Well I hope to see u guys tomorrow at ether the green or the cruse in rob told me about in xenia.
-
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 22 Apr 2010, 10:40 am

....


Last edited by 91mr2turbo on Sat 24 Apr 2010, 6:43 pm; edited 1 time in total
Back to top Go down
View user profile
Rob
Spammer
Spammer
avatar

Number of posts : 584
Age : 38
Location : Miamisburg Ohio
Registration date : 2008-06-10

PostSubject: Re: New parts   Thu 22 Apr 2010, 11:43 am

Nice!!!! Sounds like its going to be sweet when its done.
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 22 Apr 2010, 11:58 am

I hope so, I'm undecided if I want to rebuild the engine or just use it as it is. I would feel better knowing I had a fresh engine over not knowing the exact miles and history.
Back to top Go down
View user profile
tuxdreamerx
nOOb
nOOb
avatar

Number of posts : 31
Age : 28
Location : Huber Heights, Ohio
Registration date : 2010-03-22

PostSubject: Re: New parts   Fri 30 Apr 2010, 3:16 am

Once I get a better fuel set up and a good tune I shouldnt be too far behind you with my eclipse at the track.
Back to top Go down
View user profile
berger13
ARCC Secretary
avatar

Number of posts : 796
Age : 28
Location : Dayton, Ohio
Registration date : 2009-04-20

PostSubject: Re: New parts   Fri 30 Apr 2010, 11:11 pm

yeah i hear ya on that one aaron. im hoping that ill be able to build my motor this winter and it should be around a 13 second car then on all motor.

_________________
SPOOL MAKES HER DROOL!!!!
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Wed 05 May 2010, 11:25 am

Well the bad news is the engine I was gonna get ended up being bad so I didn't get it, thank god for leak down testers lol. So in the mean time till I can find another 3sgte or Something I bought a bunch of new parts that just came in.

91- speed source brass shift cable bushings, urithane motor mount incerts, new right&left e brake cables

85- speed source brass shift cable bushings, urithane motor mount incerts, kyb gr2 struts, TRD springs

More parts on order, now I just need to install.......
Back to top Go down
View user profile
doored90
ARCC Vice President
avatar

Number of posts : 1174
Age : 32
Location : xenia
Registration date : 2008-01-05

PostSubject: Re: New parts   Wed 05 May 2010, 6:29 pm

aron ur alive?????????????
Back to top Go down
View user profile http://www.ohiominitrucks.com
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 06 May 2010, 10:48 am

Lol yeah been really busy. Been working almost 70 hours a week with school so I can afford to buy stuff for my mr2's. Havnt been doing anything but work, sleep and school. On weekend is the only time I have to work on my cars and I have a lot of new parts I'm trying to install. During the week the only free day I have is Friday night. But I will be quitting Fedex in July or early aug. After I get all the parts I want.
So after that I will have plenty of free time to do whatever again and will most likely be at every cruse in/car show/kil kare again like I did last year.

Gotta work hard to get what u want lol
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 06 May 2010, 11:13 am


urithane rear sway bar bushings


re-did the intake set up


cleaned up engine bay by painting valve covers and buying a stainless valley cover


the kyb gr2 struts for my blue mr2


brass shift bushings for both mr2's


finaly bought ebrake cables or the turbo(sucked not having a e brake)


front and rear motor mount incerts for both mr2's


finally ordered the header wrap for my mani so I can install it


the TRD springs for the blue mr2
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 06 May 2010, 11:40 am


stock end links. These were clicking really bad and anoying the piss out if me sooooo


all new end links, way bigger than stock


decided to check on my turbo, I think my shaft play is a bit much so it's ether rebuild time or new turbo. Yea! Also found a lot of oil in the intake pipe before the turbo and on the compressor wheel, turns out the stock crank case venting into the intake=oil crap all over turbo and intercooler pipes. I vented the crank case with a filter for now till I can buy a oil catch can.


Rust!!!!! Fixed over winter

also pics of the horrible rust damage on the floor pannels of the blue mr2. There was a rust valley going the whole length of the floor pan on each side of the support beam. This pic is just te passenger side being fixed, the drivers side was really bad too.




driver side rust

more driver side rust spots.

Turns out it was way worse than way you could see, once the rust started to be removed a lot more was found. Fishers brother did all the work on te floor boards then under coated both top and bottom of the floor pans.
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Wed 12 May 2010, 4:07 pm

Just ordered a rom tune for my mr2 turbo



it's tuned by ats racing...
Mods
-k&n style air filter
-2.5 in down pipe
-3in single exit exhaust
-ats fuel rail & fpr
-ats ct27( modified ct26 stock turbo)
-side mount IC
also
-rev limit raised to 7600
-fuel cut removed
-duel map for both pump gas(93) and race gas
-tuned on 17psi pump gas and 20psi race gas

more to come by slamology I hope
Back to top Go down
View user profile
playin4keeps
ARCC Member
avatar

Number of posts : 1262
Age : 30
Location : Xenia
Registration date : 2008-01-07

PostSubject: Re: New parts   Wed 12 May 2010, 4:21 pm

nice bro looks good!
i am saving right now to do a complete upgrade. ECU, Hondata, MAP sensor, plugs an wires, injector, dyno and tune. . .
Looking at about 400hp to the wheels when complete
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Wed 12 May 2010, 8:51 pm

sweet I'm looking to get around 350 RWHP but it's gonna take upgrading to 550cc injectors, new fuel pump, cams, and cam gears. Then I would need to have my rom tune redone by ats racing. It's pretty cheep for a retune, all I haft to do is tell them what mods I have and how much psi I want on pimp and race gas.


just got my shop manual in for my car, these are so rare and hard to find. I just so happened to come across one on my form.
Back to top Go down
View user profile
berger13
ARCC Secretary
avatar

Number of posts : 796
Age : 28
Location : Dayton, Ohio
Registration date : 2009-04-20

PostSubject: Re: New parts   Thu 13 May 2010, 2:08 pm

dude thats gonna be nasty. you and roades definately gotta run at kilkare once your both tuned and completely finished.

_________________
SPOOL MAKES HER DROOL!!!!
Back to top Go down
View user profile
91mr2turbo
ARCC Member
avatar

Number of posts : 395
Age : 29
Location : huber heights
Registration date : 2009-04-19

PostSubject: Re: New parts   Thu 13 May 2010, 4:45 pm

Yeah now that I have this rom tuned ecu I can have it reprogramed once I get more mods.
To reach my goal I need
-ct27 turbo(modified ct26 w/tdo4 compressor wheel)
-550cc injectors
-new fuel pump
-264 cams
-adjustable cam gears

Mr2's on my form run low 12's and some run high 11's with this set up.

Next month before slamology I should have at least my new turbo I hope. So it should be pretty quick.
Back to top Go down
View user profile
berger13
ARCC Secretary
avatar

Number of posts : 796
Age : 28
Location : Dayton, Ohio
Registration date : 2009-04-20

PostSubject: Re: New parts   Thu 13 May 2010, 6:47 pm

lol yeah but it wont keep up with my 500+hp integra that runs 9's haha and has so much torque that the chassis twists coming off the line bwahahahahahaha

_________________
SPOOL MAKES HER DROOL!!!!
Back to top Go down
View user profile
TD's-civic
ARCC Member
avatar

Number of posts : 543
Age : 30
Location : xenia,OH
Registration date : 2007-12-22

PostSubject: Re: New parts   Fri 14 May 2010, 9:26 am

lol ok berger we get it your car is slow and has no hp lol
Back to top Go down
View user profile
berger13
ARCC Secretary
avatar

Number of posts : 796
Age : 28
Location : Dayton, Ohio
Registration date : 2009-04-20

PostSubject: Re: New parts   Sun 16 May 2010, 6:21 pm

hahahhahahaha at least mine is running and MOVES bwahahahahahaha jk bro. we need to get the civic running asap

_________________
SPOOL MAKES HER DROOL!!!!
Back to top Go down
View user profile
Lil Fish
ARCC President
avatar

Number of posts : 1018
Age : 32
Location : Xenia, Ohio
Registration date : 2007-11-25

PostSubject: Re: New parts   Mon 17 May 2010, 8:34 pm

yes we need to get the civic back into the show seasons.
Back to top Go down
View user profile http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile
Sponsored content




PostSubject: Re: New parts   

Back to top Go down
 
New parts
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Parts washer fluid
» Parts List for the Conversion
» best sites to find parts for ae82 sadans
» Public Service Message - BFY parts
» Chevy Van PARTS & INTERCHANGE

Permissions in this forum:You cannot reply to topics in this forum
Adrenaline Rush Car Club :: GENERAL :: OFF TOPIC-
Jump to: